What are the characteristics of windows?

Effect
Windows are not only used to look at the scenery outside, but to a large extent, determine the quality of life, but sometimes, many problems are not noticed at all.
Home is a habitat, a relatively independent small environment created by myself, which is protected from wind and rain, shading and sound insulation, and protecting myself from any intrusion from outside factors. It is said that it is relatively independent because it is impossible to live alone without being completely separated from the outside environment. It requires a reasonable exchange and exchange between indoors and outdoors. In this small environment, you need the right temperature, humidity, air, and light, as well as a sound environment that suits you.
You need windows to let in light, so the excess heat will come with the sun.
The windows need to be ventilated, so with the circulating air, it may be dust and mosquitoes.
Problems often follow your needs, so you must not be careless about your own windows


Features
The characteristics of broken bridge aluminum alloy windows are:
1. The heat-insulating aluminum alloy profile is used, and the inner and outer aluminum alloy and the heat-insulating strip are combined by rolling.
2. Use hollow glass to improve heat preservation performance and sound insulation effect.
3. Adopt independent sealing structure, sliding window adopts double rubber strip double top four sealing structure; casement window adopts equal pressure principle, adopts one hard seal and two soft seal three seal structure, which has excellent air tightness and water tightness .
4. Choose high-grade accessories, beautiful shape, flexible operation, safe and reliable, which is beneficial to the heat insulation effect of windows

评论

发表评论

此博客中的热门博文

Need to pay attention to many issues when choosing doors and windows?

 1. The appearance should be beautiful: the surface paint film of wooden doors and windows should be smooth and bright, without flow, bubbles, wrinkles and other quality defects, without corrosion points, dead knots, and broken; the wood used for the door and window cover should be the same as the wood of the doors and windows. The color is coordinated, the color difference between the veneer and the wood line cannot be large, and the tree species should be the same. 2. The door and window sash should be square, not warped and deformed, and consistent with the door and window frame: If the gap between the door and window sash and the frame is large, it is mainly because the planing and repairing is not correct during installation or the door and window frame is not perpendicular to the ground. Re-plan and repair under the bottom; if the door and window frame is not vertical, straighten the gasket in the frame plate. 3. The hinges should be positioned accurately and installed firmly: If
阅读全文

Compared with wooden doors and windows, steel doors and windows, aluminum alloy doors and windows have the following characteristics

 1. Light weight, strong and durable. Aluminum alloy doors and windows are about 50% lighter than steel doors and windows; they are more corrosion-resistant than wooden doors and windows, and are not easy to decay. The oxidized color layer does not fall off, does not fade, and is durable. 2. Good sealing performance. Aluminum alloy doors and windows have high airtightness, water tightness and sound insulation are better than wooden doors and windows and steel doors and windows. 3. Bright and beautiful color. The frame materials of aluminum alloy doors and windows are treated by ammoniating and coloring, and can be colored silver, bronze, dark red, etc., and can be colored with colored patterns. The aluminum alloy doors and windows made of it have beautiful appearance, smooth surface, bright and firm color, and enhance the decorative effect of indoor and outdoor facades. The split single-layer glass release plastic steel doors and windows are the fourth generation of doors and windows a
阅读全文

Classification and structure of doors

 1. Classification of doors: According to the position of the door in the building: inner door and outer door. According to the function of the door: general door and special door. According to the material of the door frame: wooden door, aluminum alloy door, plastic steel door, color panel door, glass steel door, steel door, etc. According to the opening method of the door leaf: swing door, spring door, sliding door, folding door, revolving door, rolling door, lift door, etc. 2. Door size requirements: The size of the door refers to the height and width of the door opening, which should meet the requirements for evacuation of people and the transportation of furniture and equipment, and should meet the requirements of the "Building Modulus Coordination Standard". Under normal circumstances, the height of the door is guaranteed to be no less than 2000 mm. When the upper part is set up, the height should be increased by 300~600mm. The width of the door should be sufficient for
阅读全文